Crimp Ring Retainer

Model: CRR-16

Quantity

Crimp Ring Retainers (X Washers) are easier to use than a cotter pin! Applied in a groove on shaft or pin, Crimp Ring Retainers are squeezed into place with a pliers. Remove by squeezing the top ears to reopen the ring. Heavy construction in mild steel offers strong retention. No sharp edges and minimum clearances are additional benefits. Also known as X Washers.

NOTE: Shaft sizes 5/32“, 3/16“ and 1/4“ each have two different Crimp Ring Retainers that may be used:

5/32“ shaft: use CRR-5 for normal duty applications. Use CRR-6 to provide higher thrust load in heavier-duty applications.
3/16“ shaft: use CRR-6 for normal duty applications. Use CRR-8 to provide higher thrust load in heavier-duty applications.
1/4“ shaft: use CRR-8 for normal duty applications. Use CRR-10 to provide higher thrust load in heavier-duty applications.

A [in]	0.256
C [in]	0.698
D [in]	0.905
E [in]	0.500
F [in]	0.890
Shaft Size - G [in]	1/2
Groove Seat Diameter - H [in]	0.250
Groove Width - J [in]	0.083
Material	Zinc Plated Steel
Finish	Zinc Plated
Approximate Weight/Pounds per 100 Pieces [lb]	0.18
Thickness [in]	0.075

View video gallery here.

View all case studies here.

	Clevis Pins with Grooves
	Headless Pins with Grooves
	SLIC Pins™

Can't find the exact fastener solution for you application?

No quantity too small, no quantity too large! We specialize in Personalized Engineered Solutions! We'll work with you to develop the ideal fastener solution to suit your specific application; and we'll provide preliminary prints and samples. Click here to see a brief representation of our custom capabilities.

Have a design in mind?

Send us your sketch and receive a quote. Simply fax it or email it. We can often recommend cost saving alternatives. We offer a diverse range of production capabilities, including screw machining, cold heading, drilling, ball detenting, machining, assembly and more. We love a challenge, so let us help you develop the prefect solution!