Crimp Ring Retainers (X Washers) are easier to use than a cotter pin! Applied in a groove on shaft or pin, Crimp Ring Retainers are squeezed into place with a pliers. Remove by squeezing the top ears to reopen the ring. Heavy construction in mild steel offers strong retention. No sharp edges and minimum clearances are additional benefits. Also known as X Washers.
NOTE: Shaft sizes 5/32“, 3/16“ and 1/4“ each have two different Crimp Ring Retainers that may be used:
5/32“ shaft: use CRR-5 for normal duty applications. Use CRR-6 to provide higher thrust load in heavier-duty applications.
3/16“ shaft: use CRR-6 for normal duty applications. Use CRR-8 to provide higher thrust load in heavier-duty applications.
1/4“ shaft: use CRR-8 for normal duty applications. Use CRR-10 to provide higher thrust load in heavier-duty applications.
|Shaft Size - G [in]||5/32 or 3/16|
|Groove Seat Diameter - H [in]||0.093|
|Groove Width - J [in]||0.062|
|Material||Zinc Plated Steel|
|Approximate Weight/Pounds per 100 Pieces [lb]||0.18|
No quantity too small, no quantity too large! We specialize in Personalized Engineered Solutions! We'll work with you to develop the ideal fastener solution to suit your specific application; and we'll provide preliminary prints and samples. Click here to see a brief representation of our custom capabilities.
Send us your sketch and receive a quote. Simply fax it or email it. We can often recommend cost saving alternatives. We offer a diverse range of production capabilities, including screw machining, cold heading, drilling, ball detenting, machining, assembly and more. We love a challenge, so let us help you develop the prefect solution!