Grade

 C

 Mn

 P Max.

 S Max.

 Si Max.

 Ni

 Cr

 Mo Max.

 Other Elements

Standard Carbon Steels

1006
1008
1010
1018
1022
1038
1045

.08 max.
10 max.
.08-.13
.15-.20
.18-.23
.35-.42
.43-.50

.25-.40
.30-.50
.30-.60
.60-.90
.70-1.00
.60-.90
.60-.90

0.040
0.040
0.040
0.040
0.040
0.040
0.040

0.050
0.050
0.050
0.050
0.050
0.050
0.050

 Resphosphorized & Resulphurized Carbon Steels

1117
1141
1144
12L14
1215

.14-.20
.37-.45
.40-.48
15 max.
.09 max

1.00-1.30
1.35-1.65
1.35-1.65
.85-1.15
.75-1.05

0.040
0.040
0.040
.04-.09
.04-.09

.08-.13
.08-.13
.24-.33
.26-.35
.06-.35

Pb(.15-.35)

Stainless Steel (Austenitic - Non-Magnetic)

302HQ
302
303
304
316

.10 max.
.15 max.
.15 max.
.08 max.
.08 max.

2.00 max.
2.00 max.
2.00 max.
2.00 max.
2.00 max.

0.045
0.045
0.045
0.045
0.045

0.030
0.030
.15 min.
0.030
0.030

1.00
1.00
1.00
1.00
1.00

8.00-10.00
8.00-10.00
8.00-10.00
8.00-10.50
10.00-14.00

17.00-19.00
17.00-19.00
17.00-19.00
18.00-20.00
16.00-18.00

0.60

2.00-3.00

Stainless steels (Martinsitic-Magnetic)

410
420

0.15
.15 min

1.00
1.00

0.04
0.04

0.03
0.03

1.00
1.00

11.50-13.50
12.00-14.00

Stainless Steel (Precipitation hardening Alloy)

17-4PH

0.07

1.00

0.04

0.03

1.00

3.00-5.00

15.50-17.50

The technical material presented in this appendix is for general reference only. Every attempt has been made to ensure the accuracy thereof; however, Pivot Point does not warrant in any way the accuracy or completeness of the information presented. It is the sole responsibility of the user to determine material and design suitability for their specific application.