Pivot Point imports this high quality fastener
direct from Denmark - no middlemen. Made to rigid standards, this is the
highest quality standard lynch pin available. Made from low carbon steel,
zinc plated and yellow chromate dipped, this pin is especially corrosion
resistant. The "over center" ring loop attached to the head snaps
down hard to hold the fastener in place. A special heavy ring is also available
for extreme applications.
Made in Denmark.
Lynch Pins - Zinc with Yellow Chromate
Nominal Dimensions
Stock
Code
A
Pin Diameter
B
Shank Length
C
Head Height
D
Head Width
E
Capture Length
F
Ring Width
G
Wire Diameter
Approx. Weight/Lbs.
Per 100 pcs.
HANG-1
3/16
1-1/4
1/2
11/32
1
1-1/8
.109
3.2
HANG-2
3/16
1-9/16
1/2
11/32
1-5/16
1-7/16
.138
4.4
HANG-4
1/4
1-3/4
1/2
11/32
1-5/16
1-7/16
.138
5.5
HANG-6
5/16
1-3/4
1/2
13/32
1-3/8
1-1/2
.138
7.0
HANG-8
7/16
1-3/4
9/16
1/2
1-3/8
1-1/2
.138
10.8
HANG-8L
7/16
1-15/16
9/16
1/2
1-5/8
1-7/8
.138
12.0
HANG-8HD*
7/16
1-15/16
19/32
1/2
1-1/2
1-21/32
.193
14.2
*Zinc plated pin with clear chomate (bright) black oxide ring.
"Unless otherwise noted, all dimensions are for reference only."
