|
A Pivot Point Exclusive. Revolutionary Rue Ring Cotters surround
the shaft. Automatic lock makes this one of the safest cotters
available today. Best used in light to medium applications. Rue
Ring cotters install fast without tools.
Additional feature is the manual secondary
lock which tensions the Rue Ring tight and dampens vibration.
Made of hard drawn MB spring wire, zinc plated
or stainless type 302. Easy to install - easy to remove.
HOLE PLACEMENT
END SHAFT USE ONLY
Rue Ring Cotters will retro fit most standard
applications without design changes.
Total width of any Rue Ring equals 3 of its
wire diameters. The straight wire shaft which goes through the
pin hole is one, plus two additional wire loops, one on each
side, front and back.
Recommended hole size is 2 times the wire
diameter of the selected Rue Ring.
This leaves the Rue Ring short of interfering with effective
shaft length.
Recommended web thickness is a minimum
of 1 wire diameter and a maximum of 2 wire diameters. A thicker web results in more holding power but makes
installation and removal more difficult.
|
