Pivot Point fasteners, clevis pins, cotter pins, quick release devices, cable assemblies, specialty fasteners, and new fastener innovations.

Headless Pins
Made to order with holes or grooves: this versatile fastener can be made from material to fit your application. Usually made in 12L14 carbon steel, higher strength carbon and alloy steel; and corrosion resistant stainless 303 are available.

Headless Pin Specs
A Shank Dia.	Diameter Tolerances Before Plating Cold Finished Rounds		With Holes			With Grooves
	Diameter Tolerances Before Plating Cold Finished Rounds		B Hole Dia.	C Hole Location O.C. to End of Pin	D End Chamfer Length x Deg.	F Groove Seat	G Groove Width	H End Chamfer Length x Deg.
	Carbon Steel	Stainless	B Hole Dia.	C Hole Location O.C. to End of Pin	D End Chamfer Length x Deg.	F Groove Seat	G Groove Width	H End Chamfer Length x Deg.
3/16	.1855-.1875	.1865-.1885	3/32	0.094	.016 x 45	0.093	0.062	.062 x 45
1/4	.2480-.2500	.2490-.2510	3/32	0.094	.016 x 45	0.125	0.062	.062 x 45
5/16	.3105-.3125	.3110-.3140	1/8	0.125	.016 x 45	0.156	0.075	.062 x 45
3/8	.3730-.3750	.3735-.3765	9/64	0.156	.031 x 45	0.187	0.075	.062 x 45
7/16	.4355-.4375	.4360-.4390	5/32	0.156	.031 x 45	0.218	0.083	.062 x 45
1/2	.4980-.5000	.4980-.5020	5/32	0.156	.031 x 45	0.250	0.083	.062 x 45
5/8	.6230-.6250	.6230-.6270	5/32	0.156	.031 x 45	0.311	0.097	.093 x 45
3/4	.7480-.7500	.7480-.7520	3/16	0.156	.047 x 45	0.375	0.097	.093 x 45
"Unless otherwise noted, all dimensions are for reference only."
"Plating will typically add .0002""-.0005"" to diameter."