This cotter is wound or turned on
from the middle out. Start by threading the open wire end inside
the circle into hole on shaft or pin. Keep turning the ring until
it snaps into place. To remove, start turning the circle again
in the same direction and it comes right off.
A very secure fastener, circle cotters are
used where sharp ends are not allowed. Smooth all around, this
fastener is ideal for applications associated with fabric.
Made from hard drawn MB spring wire, zinc
plated or stainless type 302.
Circle Cotter
Stock
Code
Dimensions
O.D. x Wire Dia.
Use On Diameter
Approximate Weight/Lbs. Per 100 Pcs.
Stainless Stock Code
CC-3
5/8 X .048
3/16 - 1/4
.14
CC-3-S
CC-5
3/4 X .048
1/4 - 5/16
.16
CC-5-S
CC-7
1 X .060
3/8 - 7/16
.40
CC-7-S
CC-9
1-1/8 X .072
7/16 - 1/2
.58
CC-9-S
"Unless otherwise noted, all dimensions are for reference only."
